NOVIS SOUDABOND EASY
Product description
SOUDABOND EASY is a ready-to-use, single component, self-expanding polyurethane adhesive for clean, efficient and economical permanent bonding of insulation panels and plasterboard in building and construction.
Properties:
- Cuts working time by up to 30%.
- Excellent initial bond, even at low temperatures.
- Economical in use due to precise application.
- One can covers up to 14 m² of insulation.
- Suitable for vertical applications.
- Can be applied at temperatures between -5 °C and +35 °C.
- Thermal conductivity 0.035 W/m.K enhances performance of insulation panels when filling gaps.
- Remains flexible, does not become brittle.
- Levels uneven surfaces.
- Limited post expansion for fast and precise installation of insulation panels and plasterboard.
- Substantial space and weight savings compared to conventional PU roof adhesives, bonding mortars, etc.
- Fast curing, work can continue about 1 hour after application.
- Solvent-free.
- Resistant to a variety of solvents, paints and chemicals.
- Does not age or rot, mould and mildew resistant, but not UV resistant.
- Water resistant (not watertight).
- Building material class B1 according to DIN 4102-1.
Packaging
Colour: Orange
Packaging: 750 ml aerosol can (12 per box)
Shelf life:
24 months from date of production in unopened packaging with cool (+5ºC to +25ºC) and dry storage. Cans must be stored upright to prevent blockage of spray valve. Once opened, keep container tightly closed and use within a short period.
Applications:
- Clean, efficient and economical permanent bonding of insulation panels.
- Suitable for bonding polystyrene (EPS + XPS), polyurethane (PUR/PIR) and phenol resin foam based insulation panels for flat roofs, perimeters, facades, insulation/drain elements, cellar ceilings, internal insulation, etc.
- Suitable for bonding gypsum plasterboard/gypsum fiberboard in dry lining applications.
- Suitable for bonding non-load bearing walls, e.g. partition walls, screen walls, cellar bars, stone shelves, etc., of concrete precision blocks (aerated concrete, sand-lime brick, gypsum, hollow bricks…).
- Fills cavities between individual thermal insulation panels.
Technical characteristics: | |
Base | Single component polyurethane |
Consistency | Stable adhesive foam (does not sag) |
Curing system | Moisture cure at room temperature |
Curing speed (*) | About 30 minutes – 30 mm adhesive bead |
Skin formation (*) | About 8 minutes – 30 mm adhesive bead |
Can be trimmed (‘) | About 50 minutes – 30 mm adhesive bead |
Full strength (*) | About 12 hours – 30 mm adhesive bead |
Post expansion | minimal |
Thermal conductivity (DIN 52612) | About 0.035 W/(m∙K) |
Tensile strength (DIN EN 1607) | 0,19 N/mm² |
Shear strength (DIN EN 12090) | 0,142 N/mm² |
Shear modulus (DIN EN 12090) | 0,489 N/mm² |
Temperature resistance | -40ºC to +90ºC |
+120°C (up to max. 1 hour) | |
Building material class (DIN 4102-1) | B1 |
(*) Measured at 20°C/65% R.H. These values may vary depending on ambient factors such as temperature, humidity and type of substrate.