Akfix 960P
Akfix 960P is a one component aerosol polyurethane adhesive foam curing swiftly with moisture. Providing very fast and powerful adhesion for various construction materials, especially highly recommended for heat insulation systems.
Properties:
- Powerful adhesion of polystyrene heat panels (XPS and EPS).
- Instant adhesion and wall plugging within two hours.
- More economical. Ready to use in aerosol can.
- Minimum 14 m2 heat insulation panel adhesion for each can.
- Minimum expansion during drying period.
- After dried, no further expansion and shrinkage.
- A lighter material compared to plaster, alternative material, used in heat insulation systems.
- No more extra burden or weight to building.
- High yield up to 55 liters, depending on the humidity and temperature.
- Usable at low temperature like 0 °C.
- It does not contain any propellant gases which are harmful to the ozone layer.
Stock Code | Product Code | Type | Volume | BoxQty |
FA009 | 960 | – | Gw.900 g.±%2 | 12 |
STORAGE AND SHELF LIFE
15 months if stored at room temperature.
- Best for mounting heat insulation panels and filling voids during adhesive application.
- Advised for wooden type construction materials adhesion to concrete, metal etc.
- Applications needed minimum expansion.
- Mounting and isolation for frames of windows and doors.
Basis | Polyurethane Prepolymer |
Curing System | Moisture cure |
Specific Gravity | 21±3 kg/m3 (ASTM D1622) |
Tack-Free Time (1 cm width) | 6±2 min (ASTM C1620) |
Cutting Time (1cm width)) | 20-45 min (ASTM C1620) |
Cure-Time | 24 hours |
Foam Color | Light pink |
Shear Strength | 82 kgf/cm2 |
Yield | 50-55 L (ASTM C1536) |
Fire Class of the Cured Foam | B3 (DIN 4102-1) |
Expanding volume | Minimal |
Thermal Conductivity | 0,036 W/m.k (at 20°C) (DIN 52612) |
Compression Strength | 0,03 MPa (DIN 53421) |
Water Absorption | max. 1 vol% (DIN 53428) |
Temperature Resistance | -40°C to +100°C |
Application Temperature | 0°C to +30°C |