Akfix Foam 805P
805P is a single-component PU foam used with an applicator gun and features higher yield, easier application and reusability. It does not contain any propellant gases which are harmful to the ozone layer.
Properties
- Economical consumption thanks to precise application.
- High yield up to 45 liters depending on temperature and humidity.
- Excellent adhesion & filling capacity and high thermal & acoustical insulation value.
• Conforms to fire class B3 according to DIN 4102-1.
• Mold-proof, water-proof and over paintable.
S.Code | P.Code | Type | Volume | BoxQty | B.Pallet | Barcode |
FA001 | 805P | – | Gw. 850 g | 12 | – | – |
- Filling of penetrations in walls.
- Insulating electrical outlets and water pipes.
- Filling and sealing of gaps, joints and cavities.
- Fixing and insulating of door and window frames.
Product Name | 805P MULTI PURPOSE PU GUN FOAM | |
Basis | Polyurethane Prepolymer | |
Curing System | Moisture cure | |
Specific Gravity | 19±3 Kg/ m3 | (ASTM D1622) |
Tack-Free Time (1 cm width) | 6±2min | (ASTM C1620) |
Cutting Time (1cm width) | 20-45 min | (ASTM C1620) |
Cure-Time | 24 hours | |
Foam Color | Light yellow | |
Yield | 30-45 L | (ASTM C1536) |
Fire Class of the Cured Foam | B3 | (DIN 4102-1) |
Thermal Conductivity | 0,036 W/m.k (at 20°C) | (DIN 52612) |
Compression Strength | 0,03 MPa | (DIN 53421) |
Water Absorption | max. 1 vol% | (DIN 53428) |
Can Temperature | min.5°C max. +30°C | |
Temperature Resistance | -40°C to +80°C |
Meets or exceeds the requirements of the following specifications:
- The French VOC requirements for class A+
- UL listed.
- AAMA Verified Component
- The requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168