Chemical Anchor Standard
Chemical Anchor Standard is a two-part chemical anchor. Ensures excellent anchoring of threaded ends, bolts, screws and suchlike in hollow and solid surfaces. Examples include brickwork, hollow brickwork, concrete and cellular concrete. Chemical Anchor Standard is also the perfect solution for the durable anchoring of sun shading, casings and handrails. It is also a good alternative to synthetic repair mortar for concrete, for example.
Material
Polyester epoxy resin
Advantages
- Quick-drying.
- Extremely strong.
- For universal use.
- Extremely short curing time.
- Suitable for slightly moist surfaces.
Tube 300 ml
Zettex Chemical Anchor can be used to anchor:
- Steel trellises and balustrades.
- Anchoring mechanical fastening.
- Anchoring in concrete, wind blocks, full brickwork and hollow bricks.
Zettex Chemical Anchor cannot be used on PE, PP or PTFE. It is also important to not use the first 10 centimeters of the adhesive and wait until the color is homogeneous. If the treatment time has been exceeded you must change the mixing nozzle. Surfaces must free of dust and grease. Dust and other dirt in the joints can be removed with Zettex Air jet Economy. After use hands must be thoroughly cleaned with soap, water and a hydrating hand cream.
Density | 1.8 g/ml |
Frost resistance | -15̊C |
Processing Temperature | +5̊C to +30̊C |
Consistency | Thixotropic Paste |
Basis | Polyester without Styrene |
Temperature base material (̊C) | -5 to 0 | 0 to +5 | +5 to +10 | +10 to +20 | +20 to +30 | +30 to +35 | +35 |
Gelatin and working time (min.) | 90 | 45 | 23 | 15 | 6 | 4 | 2 |
Total curing time (min.) | 360 | 180 | 120 | 80 | 45 | 25 | 20 |
Installation Parameter
Measure |
M8 | M10 | M12 | M16 | M20 | M24 | ||
Nominal diameter drilled hole | ᴓd0 | [mm] | 10 | 12 | 14 | 18 | 24 | 28 |
Depth drilled hole | h0 | [mm] | 80 | 90 | 110 | 125 | 170 | 210 |
Distance from edge | CcrN | [mm] | 80 | 90 | 110 | 125 | 170 | 210 |
Minimum distance from edge | Cmin | [mm] | 40 | 50 | 60 | 80 | 100 | 120 |
Spacing | CcrN | [mm] | 160 | 180 | 220 | 250 | 340 | 420 |
Minimum Spacing | Smin | [mm] | 40 | 50 | 60 | 80 | 100 | 120 |
Minimum thickness of part | hmin | [mm] | 110 | 120 | 140 | 160 | 215 | 260 |
Turning torque | Tinst | [mm] | 10 | 20 | 40 | 60 | 120 | 150 |
- 0756-CPD-0434 15
- ETA 11/0445
- ETAG 001-1 and 5, option
- DoP: Z-495321-13
- CE marking