Akfix Polyurea 1045 (Eco Pure)
AKFIX Polyurea 1045 is a very fast set, rapid curing, flexible, two component, aromatic pure polyurea coating system derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. The system is designed as a waterproofing and floor protective coating for concrete, metal, wood, ceramic, geotextile and PU foam substrates. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.
Properties
- Seamless coating
- Excellent flexibility
- Broad color spectrum
- Excellent thermal stability
- Excellent chemical resistance
- 100 %solid, VOC free, no odor
- UV, chlorine and saltwater resistant
- Variable application thickness possible
- Temperature and moisture insensitive
- Excellent impact and abrasion resistance
- Very good tensile and structural strength
- Fast reactivity and fast return to service time
- Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc.
| S.Code | P.Code | Type | Volume | BoxQty | B.Pallet | Barcode |
| – | – | – | 200 kg | 1 | Barrel (Amine component) | – |
| – | – | – | 225 kg | 1 | Barrel (Iso component) | – |
- Floors– industrial floors, hospitals, factories
- Construction– roads, bridge decks, airports, line striping.
- Marine industry– ship’s underwater part and ship’s decks protection and ship docks
- On thermal insulation products for waterproofing (polyurethane foam, EPS, XPS etc.)
- Leisure industry– water parks, aquariums linings, playgrounds and decorative applications
- General waterproofing and anticorrosion applications– tanks, pools, swimming pools, ponds, pipes, pipelines, waste water treatments, manholes and sewer linings, roof, balcony and terrace coatings.
| Product Name | AKFIX POLYUREA 1045 (ECO PURE) | |||
| Component Properties | ||||
| Unit | Method | ISO COMPONENT (A) | AMINE COMPONENT (B) | |
| Density (25°C) | gr/cm3 | ASTM D 1217 | 1,11±0,03 | 1,02±0,02 |
| Viscosity (25°C) | mPa.s | ASTM D 4878 | 700-800 | 300-600 |
| Shelf life | 9 months | 9 months | ||
| Process Properties | ||
| Unit | Datas | |
| Mix Ratio | By volume
By weight |
A=100 B=100
A= 112 B= 100 |
| Process temperature(°C) | °C | A:70-80 B: 70-80 |
| Process pressure (bar( | Bar | A: 180-200 B: 180-200 |
| METHOD | DATAS | |
| Chemical structure | A: MDI Prepolymer B: Amine Resin | |
| VOC content (%) | ASTM D1259 | 0 |
| Solid content (%) | ASTM D2697 | 100 |
| Gel time (sec) | 5-10 | |
| Tack free time (sec) | 15-30 | |
| Recoat time (hr) | 0-12 (without pretreatment) | |
| Post cure time (hr) | 24 | |
| Density (gr/cm3 ) | ASTM D792 | 0,99-1,03 |
| Tensile strength (MPa) | ASTM D638 | ≥ 15 |
| Modulus (MPa) | ASTM D638 | %100 elongation ≥10
%300 elongation ≥12 |
| Elongation at break (%) | ASTM D638 | ≥375 |
| Hardness (Shore D) | ASTM D2240 | 35-40 |
| Hardness (Shore A) | ASTM D2240 | 90-95 |
| Tear strength (N/mm) | ASTM D 624 | ≥40 |
| Taber abrasion (mg) | EN ISO 5470-1 | ˂100 (H22/1000 cycle) |
| Impact resistance | EN ISO 6272-1 | Class III |
| Thermal Resistance | -30 °C-100°C | |
| Pull off strength (N/mm2 ) | ASTM D 4541 | Concrete: ≥2,5 Steel: ≥6 |