Easy Silicone S
Zettex Easy Silicon S is a high quality one component sealant based on alcoxy curing silicones (neutral system). Zettex Easy Silicone is mold- and chlorine resistant. Zettex Easy Silicon is also suitable for use in clean rooms and food industry.
Material
Neutral alcoxy silicone
Advantages
- Low of odor
- Easy to process
- Neutral acid-free
- Permanently elastic
- Antifungal protection
- Durable and colorfast
- UV and water resistant
- Excellent adhesion without use of a primer on a wide range of surfaces.
- High possibility of movement according the standards of ISO 11600-F&G 25 LM
- Cartridge 310 ml
- Sausage 400 ml
- Sausage 600 ml
Color
White, off white, RAL 9001, RAL 9002, Light Grey, Sanitary Grey, Transparent Grey, Transparent, Black, Anthracite RAL 7016, Manhattan, Buxy. Other colors are available on request. You can apply for the Easy Silicon S color chart
- For sealing joints, seams, cracks in construction, house, car or caravan. Good adhesion to various types of plastics, stone and masonry. Excellent adhesion without primer on all common building materials such as concrete, stone, natural stone ceramics and glass.
- For sealing on porous and non-porous surfaces where mold can be dangerous.
The surface has to be free from dust, grease and oil residue. This all can be cleaned with our Zettex Profi Cleaner. Spray the Profi Cleaner on the Zettex Bont or White tricot cloth and clean the surface. The Zettex Easy Silicon S can be applied on most surfaces without the use of a primer. Despite, a test before is recommended. If you are hesitating than you can connect our technical department. They can answer all of your questions.
Zettex Foam Filling can be used as a backup material to decrease the depth of the joints. After pretreatment Zettex Easy Silicon S can be applied by a Zettex Caulk (for cartridges) or Sausage (for sausages) gun. You can smooth finish it with our Zettex Easyfinish. Uncured residue can be removed with Zettex Profi Cleaner. Cured residue can only be removed mechanically.
Please not that you cannot apply Zettex Easy Silicon S on bituminous surfaces or other building materials with leaking oil, plasticizers or solvents. There is no bonding available on PE, PP or PTFE. Besides that Easy Silicon S is not suitable for over painting.
| Features | Specification |
| Shore A Hardness | 20 +- 3 |
| Hardening | 3 mm per 25 hours |
| Processing temperature | +5°C to +40°C |
| Specific weight | 1,02 g/ml |
| Skin forming time (at 23 degrees; 50 % R.H.) | 5-15 min |
| Temperature resistance | -40°C to +150°C |
| Loss of volume | <10 % |
| Possibility of movement | 25 % |
| Elastic recovery | >85 % |
| Base | Neutral alcoxy silicone |
- CE marking
- ISEGA food graded