Superlube Hexaflon
Zettex Superlube Hexaflon is developed to create a dry film, low friction surface, effective over a wide temperature range. The Superlube is resistant against temperatures between -40 °C and 220 °C. Due to dry properties, Zettex Superlube Hexaflon does not attract dirt.
Product benefits
- Extremely fast drying
- Exceptional thermal stability
- Outstanding light resistance
- Outstanding chemical resistance.
- Lowest coefficient of friction of all lubricants.
- Non-grease dry film does not attract airborne dirt and grit.
Packaging
- Aerosol 500 ml.
Color
- Transparent
Zettex Superlube is suitable for all substrates including wood, metals, rubbers and plastics, and is particularly beneficial in the assembly/disassembly of pre-treated components. Please don’t use it on any surface where application of a slippery film may create a health hazard.
Shake can thoroughly before use. Hold upright, and spray from a distance of 15 to 30cm. Take care to avoid overspray, especially on floors.
| Features | Specification |
| Appearance | An opaque, non-homogeneous milky liquid |
| pH | Not applicable |
| Specific Gravity | 0.700 +/- 0.15 at 20 degrees |
| Flammability, as supplied | Extremely flammable, flash point below -20 |
| Composition Data | A dispersion of PTFE in isopropanol, and naphtha [petroleum], hydrotreated, light, in a butane/isobutane/propane propellant. |
| Non Volatiles % m/m | 0.1-5.0 |
| Service temperature (Continuous) | Up to 250 ℃ |
| Active content % m/m , as supplied | 40-50 |
| Consistency | Free flowing liquid |
| Service temperature (Intermittent) | Up to 300 ℃ |