Epoxy Stick Metal
Zettex Epoxy stick is a moldable two-part epoxy. This repair product is mixed (manually) in one minute and ensures a long-term repair. Zettex Epoxy Stick can also be applied under water and adheres to surfaces such as fiberglass, metal, wood, concrete and glass. Zettex Epoxy Stick also works very well when it is in contact with saturated salt solutions, leaded petrol, turpentine, and propylene glycol.
Material
Epoxy
Advantages
- Easy to use
- Super strong
- For universal use
- Extremely long life
- Hardens in 10 minutes
- At full strength in 24 hours
Available forms
- Stick 180 ml
Color
- Grey
Areas of application:
- Repairing tanks and drums.
- Repairs of holes in pipework
- Sealing small holes/openings in castings so the material allows no more moisture through.
Application instructions
All surfaces must be thoroughly roughened. This can be done with an abrasive disc or by shot-blasting. The product ensures a clean and rough base surface. The surface can also be cleaned using Zettex Profireiniger.
| Features | Specification |
| Typical property | Cured in 7 days at 24 ℃ |
| Color | Black, changes to grey after mixing |
| Viscosity | Moldable by hand |
| Open processing time | 20 minutes |
| Strength | 83 N/mm2 |
| Tensile strength | 5 N/mm2 |
| Shore hardness cured | 75 |
| Electrical conductivity | 300 |
| Level of solid substances | 100% |
| Temperature resistance | 121 ℃ – 149 ℃ |
| 10 % Sulfuric acid | Good |
| 10 % Hydrochloric acid | Good |
| Chlorinated solvents | Very good |
| Methanol | Very good |
| Toluene | Very good |
| Ammonia | Very good |
| Sodium hydroxide | Excellent |
| Kerosene | Very good |