D3 Wood Adhesive
Zettex D3 is a universal, solvent-free, water-resistant and ready-to-use wood adhesive for interior and exterior applications. Zettex D3 Wood Adhesive is suitable for bonding all hard and soft wood species. Zettex D3 Wood Adhesive is also suitable for bonding HPL panels, unless the other surface is porous in structure.
Material
PVAC
Advantages
- Water-resistant
- Can be painted over
- Suffices with regard to Watt 91
- Pressing with gluing clamps, hot and cold pressing
- Universal use for construction and surface adhesion.
- Environmentally friendly and cost-saving with a wide range of packaging.
- Apply with a brush, adhesive comb, adhesive roller or glue gun (pressure vessel)
Available forms
- Bottle 250 g
- Bottle 750 g
- Bucket 2.5 kg
- Bucket 5 kg
- Bucket 10 kg
- Bucket 25 kg
- IBC 1100 kg
Application instructions
Zettex D3 is suitable for all kinds of construction joints such as dowels, tongues, swallow tails and pin and hole joints. Zettex D3 is also for example suitable for assembly adhesion, facade boards, doors, ladders and garden furniture. Zettex D3 wood adhesive is also suitable for gluing applications in bathrooms and kitchens
Zettex wood adhesives are suitable for gluing a wide range of woods. Examples include hard, soft and exotic wood types. The wood adhesives also glue veneer and hard synthetic boards, chipboard, plywood, MDF, hardboard and many more wood materials. A condition for gluing is that at least one of either surface is porous.
Both sides of the surface must be dry and free of dust and grease. The adhesive must be briefly stirred beforehand, after which the adhesive is evenly spread on one side with for example a brush, adhesive comb, adhesive roller or glue gun. If both sides are porous apply the adhesive on both sides. Adhesive can be diluted 3% with water. Immediately remove wet glue residues with Zettex Profireinger. Hardened glue residues can be mechanically removed.
| Features | Specification |
| Basis | PVAC |
| Solid substance content | 50% |
| Specific gravity | +- 1.1 g/cm3 |
| pH Value 25 ℃ | 3 |
| Min. Processing temperature | +10 ℃ |
| Color original | White |
| Color dry | Transparent |
| Odor | Odorless |
| Components number | 1 |
| Temperature resistance | -20 to 80 degrees |
| Frost resistance | According to NEN-EN 204 D3 |
| Open time | Maximum of 10 minutes |
| Amount required | Approximately 125-250 g/m2 |
| Shear strength | 110 kg/cm2 |
- EN 204 D3