Akfix Silicone 100S
Acetoxy cure, high performance, mold-proof silicone sealant designed for gap filling and sealing in a wide range of sanitary applications.
Properties
- Fast curing.
- No shrinkage.
- Acetoxy curing system.
- Does not crack or discolor.
- Low modulus, high elasticity.
- Prevents mold formation on its surface.
- %100 silicone, does not contain any solvent.
- Resistant to extreme temperature (-60 °C to +180 °C)
- Withstands detergents, cleaning agents and chemicals.
- Excellent resistance to direct sunlight, rain, snow and ozone.
- Primerless adhesion to numerous porous and non-porous substrates.
- Stays bright and clean thanks to its outstanding mildew and & fungus resistance.
| S.Code | P.Code | Type | Volume | BoxQty | B.Pallet | Barcode |
| SA031 | 100S | Transparent | 280 ml | 24 | – | – |
| SA032 | 100S | White | 280 ml | 24 | – | – |
- Glazing works.
- Weather seal application.
- Sealing of connection joints.
- Sanitary joints: Sealing applications in kitchens and bathrooms.
| Product Name | 100S SILICONE SANITARY SEALANT | |
| Basis | Silicone Polymer | |
| Curing System | Acetoxy | |
| Density | 1.02 ± 0.03 g/ml | (ASTM D 792) |
| Hardness Shore A | 24-30 (after 28 days) | |
| Tensile Strength | ≤ 0,4 N/mm² | (ISO 8339) |
| Skin formation | 7-13 min. (23°C and 50% R.H) | |
| Curing Rate | Min. 3 mm/day (23°C and 50% R.H) | |
| Elongation At Break | ≥ 250% | (ASTM D 412) |
| Elastic Recovery | Approx.100% | (ISO 7389) |
| Sagging | 0 mm | (ISO 7390) |
| Change in volume | < 5% | (ISO 10563) |
| Temperature Resistance | -50°C to +200°C | |
| Application Temperature | +5°C to +40°C | |
Meets or exceeds the requirements of the following specifications:
- The requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168.
- CE marked for EN 15651 for façade applications.