Akfix Polyurea 1044 Standard Pure
AKFIX 1044 is a very fast set, 2-component, 100% solid flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. This general purpose aromatic pure polyurea has been especially designed to protect and coat concrete, metal, wood, ceramic, geotextile surfaces. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. Its extremely fast gel time makes it suitable for applications down to -20 °C without special conditioning of the component resins and isocyanates. It is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.
Properties
- No catalyst
- Anticorrosive
- Little or no odor
- Water resistant
- Excellent flexibility
- Broad color spectrum
- Excellent thermal stability
- Excellent chemical resistance
- Seamless and joint-less coating
- High application thickness possible
- %100 solid, VOC free, no solvents
- UV, chlorine and saltwater resistant
- Variable application thickness possible
- Excellent impact and abrasion resistance
- Very good tensile and structural strength
- Non sensitivity to temperature and humidity
- Fast reactivity and fast return to service time
- Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc.
| S.Code | P.Code | Type | Volume | BoxQty | B.Pallet | Barcode |
| – | – | – | 200 kg | 1 | Barrel (Amine side) | – |
| – | – | – | 225 kg | 1 | Barrel (Iso side) | – |
- Truck bed liners
- Marine industry 09 / 2015Rev.01 Page 2
- Floors –industrial floors, hospitals, factory, auto parks, garage
- Construction – roads, bridges, railways, high speed railways, tunnels, airports
- Leisure industry- water parks, aquariums, play grounds , decorative applications
- High abrasion applications –oil and gas industry, refineries, pipelines, petrochemical industry, mining, secondary containment, energy industry
- General water isolation –water tanks, pools, swimming pools, ponds, water pipes , membranes, waste water treatments, manholes, sewer -lining , roofs
| Product Name | AKFIX POLYUREA 1044 (STANDARD PURE) | |
| METHOD | DATAS | |
| Chemical structure | A: MDI Prepolymer B: Amine Resin | |
| VOC content (%) | ASTM D1259 | 0 |
| Solid content (%) | ASTM D2697 | 100 |
| Gel time (sec) | 5-10 | |
| Tack free time (sec) | 15-25 | |
| Recoat time (hr) | 0-12 (without pretreatment) | |
| Density (gr/cm3 ) | ASTM D792 | 0,99-1,03 |
| Tensile strength (MPa) | ASTM D638 | ≥ 18 |
| Modulus (MPa) | ASTM D638 | %100 elongation ≥10
%300 elongation ≥15 |
| Elongation at break (%) | ASTM D638 | ≥350 |
| Hardness (Shore D) | ASTM D2240 | 40-45 |
| Hardness (Shore A) | ASTM D2240 | 90-95 |
| Tear strength (N/mm) | ASTM D 624 | ≥50 |
| Taber abrasion (mg) | EN ISO 5470-1 | ˂30 (H22, 1000 cycle) |
| Impact resistance | EN ISO 6272-1 | Class III |
| Pull off strength (N/mm2 ) | ASTM D 4541 | Concrete: ≥2,5 Steel: ≥6 |