Mega Clean

image_mega-clean-mockup-aerosol-dop-v1_large

Zettex Underbody Coating spray is a black, bitumen-rich, water-resistant, anti-corrosion coating for surfaces on the bottom of cars. Protects against physical damage, rubble and repels moisture. Zettex Underbody Coating can be painted over with most painting systems.

Properties

  • Paintable
  • Primer not required.
  • Excellent anti-corrosion properties.
  • Excellent resistance to water and salt.
  • Semi-flexible coating, resistant to cracks.
  • 360 degree usability ensures that Underbody Coating can even be applied on surfaces that are difficult to reach.

Available form
Spray can 500 ml.

Color
Black

First thoroughly clean the surface. Dust, oil, grease and other residues can be removed with Zettex Mega clean. Apply the Mega clean beforehand on the Zettex Bonte or Witte tricot cloth, allow the Mega clean to work in briefly then remove the residues. Shake the spray can for at least two minutes, and repeat this when the can has not been used for a while. Apply the spray from a distance of 20-30 cm from the surface. The Zettex Underbody Coating fully dries within 24 hours, depending on the temperature and the thickness of the coating.

Download TDS

Features Specification
Appearance Black with an aromatic odor
pH Not applicable
Specific gravity 0.92 – 0.96
Not volatile % m/m 50 – 60
Active content % m/m, as supplied 30 – 40
Flammability, as supplied Highly flammable, flash point below -20°C
Viscosity 2500-4000 cPs
Volatile organic constituents, as supplied In compliance with EU directives 2004/42/CE
Application temperature 15-25 ℃