Graffiti Remover
Zettex Graffiti Remover removes graffiti thoroughly from most surfaces without damaging them. Besides that, the composition of Zettex Graffiti Remover is extremely effective, without the use of methylene chloride.
Material
Hydrocarbon cleaner
Properties
- Biodegradable
- Works very fast
- Does not form shadows
- Do not touch the surface
- Applicable to almost any surface
- Aerosol 500 ml.
Color
- Transparent
You can use the Zettex Graffiti Remover on all “hard” impervious surfaces for the removal of a wide range of graffiti including paint, ink, crayon, felt tip marks etc. Please don’t use it on plastics, without first assessing suitability of use on an inconspicuous area and in direct sunlight or hot surfaces, where premature evaporation may occur prior to reaction.
Shake well before use. Spray onto the surface from a distance of 20 – 25cm. Allow a few minutes to wet and penetrate the graffiti, and wipe off. This product may also be rinsed off with water.
| Features | Specification |
| Appearance | Clear water white liquid |
| pH | Not applicable |
| Specific Gravity | 0.870 +/- 0.010 |
| Active content % m/m/, as supplied | 60-80 |
| Non volatiles % m/m | <5 |
| Viscosity | Free flowing liquid |
| Flammability, as supplied | Extremely flammable, flashpoint below -20 |
| Composition Data, as supplied |
A solution of 2-Methoxy-1-Methyl ethyl acetate. Acetone, n-butyl acetate, Methylal, 1,3 Dixolane and fatty alcohol ethoxylate in butane/isobutane/propane propellant |
| Service Temperature (Continuous) | Designed for use at ambient temperature |