Stonefix
Zettex Stonefix is a one-component PU adhesive for bonding blocks and stones. Zettex Stonefix is very economical in use. Using the Zettex Foamgun is necessary for the application. Zettex Stonefix creates a strong bond within 30 minutes and is certified according to the most strict building standards.
Material
Polyurethane
Advantages
- Very fast
- Easy to use
- Easy to dose
- Ready to use
- Multi-purpose
- Extremely powerful
Available forms
- 500 ml HH Aerosol
- 750 ml NBS Aerosol
Application instructions
Used for the fast gluing of building block on non-supporting interior walls. Zettex Stonefix can also be used for the gluing of, for example, wooden paling in a garden. Zettex Stonefix can also be used outside for gluing different elements.
- Hold the stone adhesive in an upward position, remove the cap from the adapter and screw the spray can on the Zettex Foamgun.
- Make sure that the Foamgun is not pointing at other people while the spray can is being screwed on.
- After fastening the Zettex Stonefix can it must be shaken at least twenty times before it can be used.
- The surface must be moistened because Stonefix cures better and faster on surfaces moistened beforehand.
- In cold weather conditions, the Stonefix must be heated in a warm room or with warm water. The temperature may not exceed 30 degrees!
- Join the stone surfaces immediately after the Stonefix has been applied.
- Any non-cured foam can be removed with Zettex Foamcleaner. Hands can be cleaned with the Zettex Cleaning Wipes
Features | Specification |
Touch dry time | 8-15 mins. |
Fully cured | 24 hours |
Fully cured (+5℃, 50 % RH) | 72 hours |
Fire class of hardened foam | B3 |
Flashpoint of hardened foam | 600 ℃ |
Flammable | NO |
Temperature resistance of hardened foam | Long term: -40 to +90 degrees |
Short term: -40 to +110 degrees |
- ISO 9001 BUREAU VERITAS Certification
- Tested by Teede Tehnokeskus institute, The Netherlands